BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M5POST - BMW M5 Forum > F10 M5 Forum > Mechanical Maintenance - Break-in, Oil, Fluids, Servicing, Etc.

Post Reply
Thread Tools Search this Thread
      09-13-2021, 10:25 AM   #1
New Member

Drives: BMW M5 F10
Join Date: Feb 2021
Location: Georgia, Tbilisi

iTrader: (0)

Exclamation Engine electronics problem

Hello guys! So I have a 2013 BMW M5 F10 with 137k km on the clock. Recently I did a full engine service & rebuild with forged connecting rods. The car ran fine but had a rough idle, tried to do everything to fix that but nothing helped. Local guys recommended for me to lower the engine and change the headers, my friend had a really good set of headers and got them for free and decided to change them. After they were changed we were not able to start the car...

After we disconnected one of the Camshaft position sensor the car started roughly and was running with misfires. Did a lot of troubleshooting locally, tried to change the ECUs (did not help), timing chain is adjusted and vanoses are fitted correctly (there was a thought that intake and exhaust vanoses were installed incorrectly) now the only thing that is left is for us to change the whole engine wiring... hoping that will fix the issue.

Do you guys have any experience in such case? What more can I look for?
Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 12:27 PM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2021, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST