03-01-2020, 10:58 AM | #1 |
Private
18
Rep 53
Posts |
Suggestions to get these to fit?
I gave MVForged my name and model to build these wheels but unfortunately it's giving me a lot of issues.
The front poke a bit but I think I can make it work. The tears are what's giving me the most issues. I have to use 5mm spacers to get them to clear the rear calipers. And with the spacer it pokes out even more now. Any suggestions on how to get them flush? They didn't give me ET specs but here's what I know. F 20x9.5 275/30/20 R 20x11 305/30/20 |
03-01-2020, 12:43 PM | #2 |
New Member
3
Rep 7
Posts |
A stretch tyres should do the trick also lowering the car as much as you can will make the fitment much better.
For the tyres size i recommend 235/35/20 F 275/30/20 R This is what im running on my wheels Last edited by Hum5; 03-01-2020 at 12:50 PM.. |
Appreciate
0
|
03-01-2020, 11:27 PM | #5 |
Licensed Drug Dealer
742
Rep 2,271
Posts |
I would return the rims and get my money back. It’s their fault they didn’t provide you wheels with the correct offsets even though you gave them the info.
At the least they should change out the outer barrel to a half inch smaller, so the rears would be 10.5 instead of 11. Your 305’s should fit on the 10.5 as well |
03-01-2020, 11:49 PM | #6 | |
New Member
11
Rep 27
Posts |
Quote:
__________________
IG: RacingGreed
|
|
Appreciate
1
pleong17.50 |
Post Reply |
Bookmarks |
|
|