08-29-2021, 09:56 AM | #1 |
New Member
9
Rep 21
Posts
Drives: 2018 BMW M5
Join Date: Aug 2021
Location: Pasco wa
|
hey guys I'm wondering has anyone ever had 20s in front and 19 rear to fit a meaty big sidewall rear tire. I belive the g80 m3 comes with that set up.
I'm leaning more and more twards this setup for my 2013 M5. one issue I can't seem to figure out is I tried my brothers 19" HRE wheel on my rear and it fits but another friend's 20" Ferrada wheel did not clear the caliper. offset is fine but it actually hits the inside almost like the 20 is smaller inside diameter. wheels im leaning toward are the Ferrada fr8 if possible 19x11 rear and 20x10 front any feed back is appreciated. thank you. |
08-31-2021, 12:48 AM | #3 |
Lieutenant
511
Rep 537
Posts |
Pretty sure no car from the factory comes with bigger diameter front wheels than the rears. It's usually the other way around so it gives it a more aggressive stance. The new M3 comes with either 20f/21r or 19f/20r.
But it might look good with a huge rear tire, do post pics if you decide to do it. |
Appreciate
0
|
09-02-2021, 05:49 PM | #4 |
New Member
9
Rep 21
Posts
Drives: 2018 BMW M5
Join Date: Aug 2021
Location: Pasco wa
|
my m3 had 19s in the front and 17s rear with slicks. I dont know if you realize but most cars with slicks run a small rim in the rear thats called the drag setup not a stancer. don't have to say I'm on Crack for asking the question lol
|
Appreciate
1
M5_Brandoe237.50 |
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|