Need help with oil analysis

[kiesha2014]

Hi, received oil analysis recently. I have no idea what is it 🤣 can you help to read guys? Car has f10 m5 v8 engine with around 20k miles.
Oil used for around 6k miles.

Oil had 1 tin of liqui moly ceratec stuff.

Thanks

[Blaxwil]

Your analysis doesn't go into very good detail in my opinion. I would recommend using Blackstone for your next sample. Here's what my last Blackstone report looked like.

[kiesha2014]

I am in UK. I knew only this laboratory.
Are mine numbers normal?

[M5Dan]

Originally Posted by Blaxwil

Your analysis doesn't go into very good detail in my opinion. I would recommend using Blackstone for your next sample. Here's what my last Blackstone report looked like.

Blaxwil Are you using Mobil One 0w/40 oil for that report?

[Blaxwil]

No I've never tried Mobil One. To make a long story short, I switched from Liquid Moly to Ravenol for 2-3 oil changes. After looking at the analysis, Liquid Moly out performed Ravenol so I switched back.

[M5Dan]

Originally Posted by Blaxwil

No I've never tried Mobil One. To make a long story short, I switched from Liquid Moly to Ravenol for 2-3 oil changes. After looking at the analysis, Liquid Moly out performed Ravenol so I switched back.

Nice I'm glad you found a better oil. I'm using the Mobil 1 Ow40 European car formula because I get it when its on sale at Costco for $4.60 a quart. My blackstone report was good for the BMW oil 0w30 I just switched to the little thicker 0w40 and will send sample in once my put 5 thousand miles on it.

[kiesha2014]

Does my report look good? I had liqui moly ceratec in my oil.

[M5Dan]

Originally Posted by kiesha2014

Does my report look good? I had liqui moly ceratec in my oil.

Yes according to your green check mark under oil condition and the diagnosis/action saying the viscosity is in grade and wear metals are at satisfactory levels.

[kiesha2014]

Thanks