|
Post Reply |
|
Thread Tools | Search this Thread |
07-23-2020, 05:26 PM | #1 |
New Member
15
Rep 13
Posts |
F10 LCI steering wheel swap M1 and M2 buttons not working.
Hey everyone. Recently did the Pre-LCI to LCI retrofit for my 13 M5 and now my M1 and M2 buttons dont work. Did everything correctly (or at least i hope i did) as far as plugging in all the cables and what not. Wondering if it has something to do with the airbag code i have as it turned out i bought a stage 1 airbag vs buying the stage 2. When i went to code through Esys it would not clear so i am kind of lost if anyone had the same situation let me know !
Thanks |
07-23-2020, 08:20 PM | #2 |
First Lieutenant
171
Rep 349
Posts |
The airbag coding should have no bearing on the operation of the M1/M2 buttons.
I'd pop the airbag off and be rechecking the wiring connections (and looking at the wiring to these buttons specifically too to ensure the wires aren't pinched etc). |
Appreciate
0
|
Post Reply |
Bookmarks |
Tags |
m1 and m2 buttons, steering wheel airbag, steering wheel buttons |
|
|