M5POST
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M5POST - BMW M5 Forum > F10 M5 Forum > Navigation, iDrive, Audio, Video, Bluetooth, Phone, Coding

Post Reply
 
Thread Tools Search this Thread
      03-09-2020, 11:47 AM   #1
Fast.F10
Extruding Elements
Fast.F10's Avatar
United_States
136
Rep
205
Posts

Drives: 2016 BMW M5 Comp
Join Date: Feb 2020
Location: Florida

iTrader: (0)

Garage List
2016 BMW M5 F10  [0.00]
16 F10 M5: Mirror Folding...am I blind?

Bimmercode: Purchased Full.

Seems as if this function should work when using comfort lock on door handle per the attached..but negative. Also, in basic mode, dont seem to be able to enable the folding mirrors via fob?

I also noticed that when I increased my angle eyes to 100%, now my interior ambient lighting is now more whitish vs the orange/red color? Which is ok..but where might is color setting be if in the event I want to change back?
Attached Images
 
__________________
Appreciate 0
      03-09-2020, 01:16 PM   #2
Dwaynos
Captain
Dwaynos's Avatar
United Kingdom
338
Rep
938
Posts

Drives: F10 M5 Monte Carlo Blue
Join Date: May 2018
Location: UK

iTrader: (0)

Mirror fold only occurs when you hold the lock button or hold on the handle. I'm sure somewhere in expert mode you'll be able to code to fold on single press. Never bothered me, I just use the button inside.
Appreciate 0
      03-09-2020, 01:37 PM   #3
Fast.F10
Extruding Elements
Fast.F10's Avatar
United_States
136
Rep
205
Posts

Drives: 2016 BMW M5 Comp
Join Date: Feb 2020
Location: Florida

iTrader: (0)

Garage List
2016 BMW M5 F10  [0.00]
Just tried: holding the remote lock doesnt fold the mirrors but keeping hand on handle for a few seconds does. Disarming either way, folds the mirrors back down. Rather them fold via the FOB. Will have a look around and in expert mode.
__________________
Appreciate 0
      03-10-2020, 12:22 PM   #4
texsn95
Private
23
Rep
67
Posts

Drives: 2014 Frozen Silver M5
Join Date: Feb 2016
Location: Houston

iTrader: (0)

There are 2 more options located in the CAS (I think that is the FEM in Bimmercode) that you need to change, without having to go into expert mode. From the cheat sheet. I clearly remember having to do all 3 and then changed the delay. I'm at work so I can only look at Demo right now.

- Enable key fob and driver side door handle to fold mirrors* and close windows and moon roof
CAS => 3003 => KOMFORTSCHLIESSUNG_FB => aktiv
CAS => 3003 => KOMFORTSCHLIESSUNG_PA => aktiv
FRM => 3020 => ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN => aktiv
* To change mirror fold delay
CAS -> 3003 -> KMFRT_SCHLIESSEN => Werte= 05 for 0.5 sec, 0A for 1 sec, 0F for 1.5 sec
__________________
2014 Frozen Silver M5, CP, B&O, 601s
2006 Interlagos Blue M5 (wrecked, F/S in classifieds)
2008 Acura TL (wet weather commuter)
1995 Mustang Cobra - 347 stroker

Last edited by texsn95; 03-10-2020 at 12:27 PM..
Appreciate 0
      03-11-2020, 08:37 AM   #5
Fast.F10
Extruding Elements
Fast.F10's Avatar
United_States
136
Rep
205
Posts

Drives: 2016 BMW M5 Comp
Join Date: Feb 2020
Location: Florida

iTrader: (0)

Garage List
2016 BMW M5 F10  [0.00]
Quote:
Originally Posted by texsn95 View Post
There are 2 more options located in the CAS (I think that is the FEM in Bimmercode) that you need to change, without having to go into expert mode. From the cheat sheet. I clearly remember having to do all 3 and then changed the delay. I'm at work so I can only look at Demo right now.

- Enable key fob and driver side door handle to fold mirrors* and close windows and moon roof
CAS => 3003 => KOMFORTSCHLIESSUNG_FB => aktiv
CAS => 3003 => KOMFORTSCHLIESSUNG_PA => aktiv
FRM => 3020 => ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN => aktiv
* To change mirror fold delay
CAS -> 3003 -> KMFRT_SCHLIESSEN => Werte= 05 for 0.5 sec, 0A for 1 sec, 0F for 1.5 sec
Hrmmm, demo mode not connected seems a bit different than demo mode connected. Here is demo not connected. Will take a screen of same module in demo once connected in a few hours.
Attached Images
 
__________________
Appreciate 0
      03-11-2020, 02:29 PM   #6
TLK
First Lieutenant
TLK's Avatar
91
Rep
341
Posts

Drives: '14 M5 CP, '12 550i, '04 545i
Join Date: Sep 2016
Location: SF Bay, CA

iTrader: (0)

My recollection is that you have to set the delay low to get it to work. Search the web for f10 coding cheet sheets. You probably have to look up the info yourself, and not rely on bimmercode's canned stuff.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 08:17 AM.




m5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST