bootmod3 for BMW F series Vehicles - General Discussion

[Hotsawwce]

ETA on ots burble map?

[proTUNING Freaks]

Originally Posted by Hotsawwce

ETA on ots burble map?

They're out for both DME types/vehicles, pre-July 2014 and later 172H DME models. Double check the OTS Maps screen. Email us at support@protuningfreaks.com with your VIN if any questions at all

[pmatias03]

Originally Posted by proTUNING Freaks

They're out for both DME types/vehicles, pre-July 2014 and later 172H DME models. Double check the OTS Maps screen. Email us at support@protuningfreaks.com with your VIN if any questions at all

Originally Posted by proTUNING Freaks

They're out for both DME types/vehicles, pre-July 2014 and later 172H DME models. Double check the OTS Maps screen. Email us at support@protuningfreaks.com with your VIN if any questions at all

I've been waiting for burble on ots map to purchase BM3. Are there options for both Mild and Aggressive?

Does anyone have videos of the mild burble option on the ots map?

Thanks!

[Mr. M6]

Originally Posted by proTUNING Freaks

Race map pushes hard past 5k rpm on this version of the OTS Stage 2 race map so clutches should still be technically fine as we're keeping torque to around 650 still like with the OTS Stage 2 93 map. But, clutches wear and depending on your driving style (launching hard etc) they may wear quicker for some than others.

i got 662wtq with OTS stage 2 93, so with race gas map it will be more i think, near 700

[FSociety]

Originally Posted by Mr. M6

i got 662wtq with OTS stage 2 93, so with race gas map it will be more i think, near 700

Definitely!


New IG post 107whp+ 160wtq+ gains on STG2 93
https://instagram.com/p/BpHRgRUFAMv/

[Pikey Motorsports]

Originally Posted by proTUNING Freaks

Apologies, somehow missed this question. On the OTS Stage 2 Race map you're looking at around 680whp, maybe even 700whp, depending on dyno conditions and ambients. If you're in Germany Aral 102 is a great gas to run otherwise just your typical VP MS109 race gas.

Is boost increased with the racegas map or just timing?

[TheHouseWon]

Originally Posted by Pikey Motorsports

Is boost increased with the racegas map or just timing?

Interested to know this, too. Might help to have a 3.5 TMAP sensor maybe?

[internetryan]

Originally Posted by Mr. M6

i got 662wtq with OTS stage 2 93, so with race gas map it will be more i think, near 700

What about your clutch? I heard the stock clutch was only good for 600 or maybe 650 wtq.

[e92954]

ok so im new to bm3 , coming from jb4.BM3 is alot smoother. But and its a Big but i only made between 600 and 615 whp and between 643 and 648 TQ numbers. this is on pump 93 and downpipes . have my plugs gapped to .20 and im on 93 . humidity was around 38% seems im missing what 50 hp?

[Mr. M6]

Originally Posted by internetryan

What about your clutch? I heard the stock clutch was only good for 600 or maybe 650 wtq.

my clutch still good, i floor it when rpm 3500 and above, never from the start or lunch control, if you want to play get SSP clutch and have fun, oem clutch not for playing hard

[OneExtra]

Originally Posted by Mr. M6

my clutch still good, i floor it when rpm 3500 and above, never from the start or lunch control, if you want to play get SSP clutch and have fun, oem clutch not for playing hard

Lunch control

I need this as always tempted to eat too much

[MFIVER]

Originally Posted by Mr. M6

my clutch still good, i floor it when rpm 3500 and above, never from the start or lunch control, if you want to play get SSP clutch and have fun, oem clutch not for playing hard

My SSP clutch pack is on the way. Hoping I can beat on it senseless soon!

[Pikey Motorsports]

Originally Posted by MFIVER

My SSP clutch pack is on the way. Hoping I can beat on it senseless soon!

What’s your mods

[internetryan]

I've seen some downpipes that say they have racing cats like Fabspeed's and AMS performance. Would these be suitable for your stage 2 OTS map or do you require full catless downpipes?

[proTUNING Freaks]

Originally Posted by internetryan

I've seen some downpipes that say they have racing cats like Fabspeed's and AMS performance. Would these be suitable for your stage 2 OTS map or do you require full catless downpipes?

Yes, of course, fully decatted is not required

[internetryan]

Thanks! I do have a problem now... my cord became unplugged at 0% of a flash. Now all I get is: "2018-10-26 13:52:20,303 INFO - Vehicle not detected, takes 30-60secs after connecting cable. Is ignition on? If taking longer than usual remove the negative (ground, brown) wire from the battery in the trunk for 3 minutes and reconnect.
2018-10-26 13:52:23,291 WARN - VIN not detected yet for broadcast, waiting.."

Additionally my HUD is now virtually invisible even after the highest brightness after a previous tune. I was trying to go back to factory to see if this would fix or at least before I go see the dealer about the HUD if bootmod3 couldn't mess up/ fix the issue. Am I basically fucked as far as bootmod3 is concerned? Car runs fine and seems to be locked in previous tune, just with no HUD and no bootmod3 connectivity.

[proTUNING Freaks]

Not sure exactly what you've done but it sounds like you kicked the cord off before programming started. You can always email us at support@protuningfreaks.com and we can remote in and take a look.

[internetryan]

Thanks for the quick response. I left the car off for awhile and it looks like things are alright. Bootmod3 wouldn't have done anything to the HUD would it have? I have a feeling no, but wanted to ask before I make a repair appointment.

Edit: I'm a fucking idiot. I didn't realize polarized sunglasses make your HUD disappear.

[OneExtra]

Originally Posted by internetryan

Thanks for the quick response. I left the car off for awhile and it looks like things are alright. Bootmod3 wouldn't have done anything to the HUD would it have? I have a feeling no, but wanted to ask before I make a repair appointment.

Edit: I'm a fucking idiot. I didn't realize polarized sunglasses make your HUD disappear.

Fair play for owning up to that

[TheHouseWon]

[Lightfytr]

Just want share that I just completed the Stage 1 93 Octane on my 2014 CP. All I can say is wow! Super easy and didn't take long at all. Power difference is crazy and it's only stage 1.

[JaybeM5]

I bought a 2011 M5 a month ago and it’s remapped. Can I still use bm3 or do I need to bring it back to stock first ? The car is stock apart from ram air filters. What are my options with bm3 ?