03-13-2020, 02:14 PM | #1 |
4496
Rep 1,862
Posts
Drives: powered by bootmod3
Join Date: Oct 2014
Location: www.protuningfreaks.com | www.bootmod3.com
|
bootmod3: v0.10.100 system update is now available!
Featured on BIMMERPOST.com Wanted to share an update on our recent update. Release 0.10.100 is now out and the changes include:
NOTE: To use the new channels, go to the About screen and click on Reset Settings. MG1/MG1 Aurix New RAM Channels listing: === Boost Category ==== Boost Setpoint Distribution Factor (Turbine/Wastegate) WGDC (Base) WGDC (Adder) WGDC (Actual) Turbine Base Turbine Adder Turbine (Actual) WGDC (I-Gain) WGDC (D-Gain) WGDC (P-Gain) Boost Target (Intake Manifold) Airmass for Boost Control === Load Category === Load (Limit) Load (Target) Load (Actual) === Turbo / Wastegate Category === Target Mass Flow (Corrected for Boost Control) Target Mass Flow (Exhaust Manifold) === Ignition Category === Ignition Timing (per Cylinder) (Target Corr.) Ignition Timing Corr. (per Cylinder) Ignition Timing (per Cylinder) Ignition Mode (Cold/Warm) Ignition Mode (Spool) Ignition Correction (Total) Ignition Target === Fuel Injection Category === Relative Fuel Mass === Torque Category === Torque for Load (Target) Torque (Actual) Torque (Target)
__________________
YouTube Channel [NEW] | Facebook User Group (20,000+ members) | Tech Support Website | Wiki | FAQ | iOS App | Android App | bootmod3 Web
Sales Support Email: sales@protuningfreaks.com | Tech Support Email: support@protuningfreaks.com |
Post Reply |
Bookmarks |
|
|