09-04-2018, 03:17 AM | #1 |
First Lieutenant
160
Rep 327
Posts |
Bimmercode Help with Trunk Close and AC
There's been a few things I wanted to change using Bimmercode and i can't seem to get it work.
1. Trunk close via remote or the trunk open button - looks straight forward enough as it's not even a thing you need to use Expert mode for but it fails reading the ECU data from the module. Anyone else experience this and found a work around? Mine gets to about 90% read and then errors out 2. Keep AC off when I start the car - I toggled the AC off options but my AC still turns on everytime I start the car. Is there something else that needs to done here? 3. Turn off easy entry so the steering wheels doesn't go up and down everytime I start and stop the engine - Not sure if this needs to be coded but I can't find a way to do it in the iDrive |
09-04-2018, 10:43 AM | #2 |
Private First Class
66
Rep 100
Posts |
For the trunk,. try enabling slow data rate. I think thats what its called.
Not sure on AC, mine worked fine when I coded it. The steering wheel will need coding, I do not thin thats an iDrive option. |
Appreciate
0
|
09-16-2018, 05:08 PM | #3 |
Major
711
Rep 1,107
Posts |
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|