09-15-2018, 09:34 AM | #1 |
First Lieutenant
248
Rep 326
Posts |
ANYONE RUNNING an 20x11" REAR WHEEL?
I'm contemplating having an 11" rear wheel made so I can run a Nitto NT01
in 315-30-20. We've run these on the C7 Corvettes but they look a lot better on an 11" wheel. With an ET 37 offset, the wheel pushes out 10MM and the inboard side pushes in 16MM. If anyone has done this successfully, let me know. Otherwise I need to remove the strut and cycle the suspension to see how much clearance I have on the inboard side with the stock wheel/ tire combo.
__________________
2021 Individual Grigio Telesto Gray Pearl Metallic X5M C, BC Forged, Dinan tuned, Dinan suspension, MAD Downpipes, Dinan Exhaust. More to come.
Owner, Designer, Tuner- A&A Corvette Superchargers WWW.AACORVETTE.COM |
09-15-2018, 08:47 PM | #3 |
Private First Class
22
Rep 117
Posts |
Im running a 20x11 et 28 with 305 mpss no issue if that helps
__________________
2013 BMW M5 Silverstone Metallic/ Black Interior
Executive Package - Driver Assistance Package- Bang and Olufsen |
Appreciate
0
|
Post Reply |
Bookmarks |
|
|