Induction kit wanted

[bmwm51980]

Ideally one that locates filter by grills

[Dwaynos]

Nobody sells anything on the UK forum.

[bmwm51980]

Originally Posted by Dwaynos

Nobody sells anything on the UK forum.

Which forum does sell stuff ?

[Dwaynos]

People sell things in the classified section but usually from the USA. You'll be lucky to find much for sale in the UK, people don't tend to sell their bits. I do however have a set of BMS intakes as you know. 😉

[bmwm51980]

Originally Posted by Dwaynos

People sell things in the classified section but usually from the USA. You'll be lucky to find much for sale in the UK, people don't tend to sell their bits. I do however have a set of BMS intakes as you know. 😉

Yea noticed people in uk hardly sell a thing for m5
When I had m3/m4 all other forums sell
Bits no idea this issue with m5
I would prefer the induction cones by the grill
The videos so much louder an sound good if not
I will do the ram air induction which will give similar
Noise to Bms an cost me 40 quid

[Dwaynos]

I wanted cones by the grill but the UK weather put me off. Dont want to expose my filters to heavy rain. I thought about ram air but didn't want to butcher my air boxes. The ram air cones cost 35 each which is actually 70 quid.

[13M5F10]

Originally Posted by Dwaynos

I wanted cones by the grill but the UK weather put me off. Dont want to expose my filters to heavy rain. I thought about ram air but didn't want to butcher my air boxes. The ram air cones cost 35 each which is actually 70 quid.

I had the MSR intakes for 2 years in heavy rains during winter and never had an issue. Several times in the earlier days after install I'd pull the installed off to inspect and didn't see any water.

I know MSR includes the socks that help keep water out. I personally ran without them and car ran like a champ and I sold it with 50k miles.