07-09-2020, 12:52 AM | #1 |
Private
135
Rep 74
Posts |
F10 M5 battery replacement and recoding
Hi guys. I'm going to replace the battery in my 2014 F10 M5. The car runs fine but I'm getting a bunch of low voltage codes on the carly app. Also the top view camera gives a fault when used and carlys code says its low voltage. I'm pretty certain the battery needs to be replaced based on the research. I know the battery needs to be registered etc. But my question is will I have to recode the entire car when the battery is replaced? (Video in Motion, mirrors closing when locked, trunk close with key etc)
Does anyone know? Thanks in advance!
__________________
BMW Enthusiasts!
F10 M5 E36 M3 E70 X5M E90 335i XDrive M Sport BMW Performance Edition |
07-09-2020, 06:02 AM | #2 | |
General
59880
Rep 19,518
Posts |
Quote:
|
|
Appreciate
2
J11SEK268.00 Cylenterok135.00 |
07-09-2020, 08:32 PM | #3 | |
Lieutenant
65
Rep 563
Posts |
Quote:
To the battery, You have to register with ISTA-D or other type software. I have ISTA-D and will be willing to do it for you free of course. But just go ahead and get a battery with the same type and capacity. I think ours are the AGM type but you have to confirm. pay attention to the CCA and RC rating. ( I used Excide on my E70 with good results for a couple years). You will not loose any coding and I dare say you can install a new battery without registering right away, just do it soon after so the ECU can charge properly with a new battery profile.
__________________
More power please
Last edited by mundo74; 07-09-2020 at 08:43 PM.. Reason: Mistake |
|
Appreciate
1
Cylenterok135.00 |
07-10-2020, 11:21 PM | #4 | ||
Private
135
Rep 74
Posts |
Quote:
__________________
BMW Enthusiasts!
F10 M5 E36 M3 E70 X5M E90 335i XDrive M Sport BMW Performance Edition |
||
Appreciate
0
|
07-11-2020, 06:06 AM | #5 | |
Private First Class
91
Rep 127
Posts |
Quote:
|
|
Appreciate
1
Cylenterok135.00 |
Post Reply |
Bookmarks |
|
|