Release: OpenFlash Off-The-Shelf v2 Tunes

yehm5 · 02-11-2019, 10:03 PM

I received the map but wasn’t successful in generating the maps when the tablet was plugged into the car. Waiting to hear back from the guys at openflash

OpenFlash · 02-12-2019, 06:49 PM

Quote:

Originally Posted by OneExtra

I had the same issue, its not a big thing they will add your codes and then re-send. Took the 24 hours and it was sorted

Enjoy the map!

Quote:

Originally Posted by yehm5

I received the map but wasn’t successful in generating the maps when the tablet was plugged into the car. Waiting to hear back from the guys at openflash

Hey Hey!

I replied to your email a few days ago.

Your calibration code is in the database file, so there may be some step that is being missed or, the database file needs to be re-uploaded to the OFT.

Please re-update the database file back to your OFT -- again. Lets make sure that the file loaded correctly by doing it again.

Delete/remove all previous tune files from your OFT from the UPLOAD tab in Openflash Manager. Select the red X next to any/all existing files. Then select START at the bottom.

At the car -- go to TUNING. You should be greeted by a messages that says the tune files are being generated.

If all else fails -- we'll just uninstall the OFT from the car by writing the ORIGINAL tune back to the ECU; Use Openflash Manager to ERASE the OFT, and start over.

v3n0m · 02-13-2019, 07:11 AM

Question: does the ots tune remove the speed limiter?

OpenFlash · 02-14-2019, 01:22 AM

Quote:

Originally Posted by v3n0m

Question: does the ots tune remove the speed limiter?

It sure does

yehm5 · 02-17-2019, 10:17 AM

Unfortunately, still not able to get stg2 working...

OpenFlash · 02-18-2019, 01:35 AM

Quote:

Originally Posted by yehm5

Unfortunately, still not able to get stg2 working...

I emailed you earlier today. I suspect you aren't loading the files correctly.

yehm5 · 02-18-2019, 01:57 AM

Quote:

Originally Posted by OpenFlash

I emailed you earlier today. I suspect you aren't loading the files correctly.

Sorry, but I never received the email...just sent you PM and email to sales@openflashperformance.com

kushtrim · 02-28-2019, 07:43 PM

Do I have to fill up all the boxes again even as an existing customer or do you keep your files saved. Thanks

Dumpspec · 03-21-2019, 12:33 AM

Has anyone experienced any bogging or sputtering in 3rd gear above 5k rpm? I’ve been having this issue for some time even after replacing HPFP, coil packs and spark plugs. Currently I’m running full catless downpipes, rpi full Exhaust, Msr front mounts. Current map flashed is V2 93 oct.

rgb129 · 03-21-2019, 06:41 AM

I haven't noticed anything like that. If anything I feel a surge around 5k rpms in 3rd.

Dumpspec · 03-21-2019, 12:36 PM

i also spoke to the guys from openflash and they haven't had any experience as the one im having. we are working together to try and solve this issue. luckily i'm local so Shiv will be able to put my car on the dyno and work on it. will keep everyone updated.

Somy6 · 03-22-2019, 09:55 AM

I was getting a cel on car would go into limp mode on V2 so I switched back to V1.2.

I never ran the codes to why the car was going into limp mode so I still need to do that and perhaps try again.

Dumpspec · 03-22-2019, 10:10 AM

Quote:

Originally Posted by Somy6

I was getting a cel on car would go into limp mode on V2 so I switched back to V1.2.

I never ran the codes to why the car was going into limp mode so I still need to do that and perhaps try again.

when i originally flashed to V2 i would also go into limp mode and car was bogging bad. as soon as the car went into limp mode and when coming to a stop it would all of the sudden just shut off. i had to restart it couple times before the car is able to idle on it's own. i was able to pull a code from the tablet and it was a HPFP code. read some thread about 2013 pre lci M5 having a lower HPFP than 2014+ LCI M5 so i went ahead and replaced the HPFP. Got my car back from the shop with new HPFP and bogging and sputtering is still present, but this time around when i went into limp mode it didn't stall it self out. Tried checking codes and no codes. available.

romieromes · 03-26-2019, 02:24 PM

I'm looking into buying the OFT. Thing is, I have a F10 M5 6MT. I'm curious about the following:

- How many OTS maps are available for the F10 M5 and are they compatible with my 6MT?
- Can you block the o2 CEL when running catless DP's and still pass emmissions?

Thanks!

naiza3k · 03-26-2019, 11:33 PM

Quote:

Originally Posted by Dumpspec

Quote:

Originally Posted by Somy6

I was getting a cel on car would go into limp mode on V2 so I switched back to V1.2.

I never ran the codes to why the car was going into limp mode so I still need to do that and perhaps try again.

when i originally flashed to V2 i would also go into limp mode and car was bogging bad. as soon as the car went into limp mode and when coming to a stop it would all of the sudden just shut off. i had to restart it couple times before the car is able to idle on it's own. i was able to pull a code from the tablet and it was a HPFP code. read some thread about 2013 pre lci M5 having a lower HPFP than 2014+ LCI M5 so i went ahead and replaced the HPFP. Got my car back from the shop with new HPFP and bogging and sputtering is still present, but this time around when i went into limp mode it didn't stall it self out. Tried checking codes and no codes. available.

I'm having engine malfunction and no codes are showing up on V2 flash neither.

naiza3k · 03-26-2019, 11:35 PM

Quote:

Originally Posted by Dumpspec

Has anyone experienced any bogging or sputtering in 3rd gear above 5k rpm? I've been having this issue for some time even after replacing HPFP, coil packs and spark plugs. Currently I'm running full catless downpipes, rpi full Exhaust, Msr front mounts. Current map flashed is V2 93 oct.

I'm having similar issue with almost same mods.

Dumpspec · 03-27-2019, 09:45 AM

Quote:

Originally Posted by naiza3k

I'm having similar issue with almost same mods.

it's a shitty issue to have after spending a tone of money and time chasing the cause of the problem. i'm scheduled to dyno tune my car with openflash next week and praying it's just a tune issue that they can fix with some adjustments. will keep you updated and report back after the dyno session.

rgb129 · 03-27-2019, 01:13 PM

My check engine light came on yesterday after some spirited driving, but no WOT. The OFT didn't read any codes. I am going to hook it up to my laptop if it is still there today.

ByronUT_M6 · 03-27-2019, 02:25 PM

Those of you who are having issues with the V2 tune do you all have m5s? If so what year is your m5?

Is anyone having issues with the tune on their m6?

Thanks

naiza3k · 03-27-2019, 03:04 PM

Quote:

Originally Posted by Dumpspec

Quote:

Originally Posted by naiza3k

I'm having similar issue with almost same mods.

it's a shitty issue to have after spending a tone of money and time chasing the cause of the problem. i'm scheduled to dyno tune my car with openflash next week and praying it's just a tune issue that they can fix with some adjustments. will keep you updated and report back after the dyno session.

Thanks!
I wish I have someone local here in Colorado that can dyno tune my car.
Looking forward to your update!

Dumpspec · 03-27-2019, 06:02 PM

Quote:

Originally Posted by ByronUT_M6

Those of you who are having issues with the V2 tune do you all have m5s? If so what year is your m5?

Is anyone having issues with the tune on their m6?

Thanks

Mines a 2013 with 27k miles.

naiza3k · 03-27-2019, 06:48 PM

Quote:

Originally Posted by Dumpspec

Quote:

Originally Posted by naiza3k

I'm having similar issue with almost same mods.

it's a shitty issue to have after spending a tone of money and time chasing the cause of the problem. i'm scheduled to dyno tune my car with openflash next week and praying it's just a tune issue that they can fix with some adjustments. will keep you updated and report back after the dyno session.

Thanks!
I wish I have someone local here in Colorado that can dyno tune my car.
Looking forward to your update!

02-11-2019, 10:03 PM	#23
yehm5 Private First Class 25 Rep 108 Posts Drives: M5 Join Date: Jul 2017 Location: 92821 iTrader: (0)	I received the map but wasn’t successful in generating the maps when the tablet was plugged into the car. Waiting to hear back from the guys at openflash
	Appreciate 0

02-13-2019, 07:11 AM	#25
v3n0m Lieutenant 57 Rep 451 Posts Drives: 2013 MCB M5 Join Date: Apr 2013 Location: Vancouver, BC iTrader: (0)	Question: does the ots tune remove the speed limiter?
	Appreciate 0

02-17-2019, 10:17 AM	#27
yehm5 Private First Class 25 Rep 108 Posts Drives: M5 Join Date: Jul 2017 Location: 92821 iTrader: (0)	Unfortunately, still not able to get stg2 working...
	Appreciate 0

02-28-2019, 07:43 PM	#30
kushtrim Major 176 Rep 1,301 Posts Drives: AW 528 xdrive (AW 335i coupe s Join Date: Dec 2008 Location: bronx N.Y iTrader: (3) Garage List 2008 335i coupe [10.00]	Do I have to fill up all the boxes again even as an existing customer or do you keep your files saved. Thanks __________________ M-tech front and rear bumpers /M3 style side skirts/gloss black painted roof/ black window trim/Matt black grill/35%tints/4"dimisaTips/CF splitters/M3 style trunk spoiler/VMR V70s/JB4/BMS dci/AMS FMIC/H&R sport with BMW performance shocks. Thanx Sal and he's crew@AutoCoutureMotoring
	Appreciate 0

03-21-2019, 12:33 AM	#31
Dumpspec Major 570 Rep 1,234 Posts Drives: @dumpspec Join Date: Apr 2014 Location: Bay Area iTrader: (12)	Has anyone experienced any bogging or sputtering in 3rd gear above 5k rpm? I’ve been having this issue for some time even after replacing HPFP, coil packs and spark plugs. Currently I’m running full catless downpipes, rpi full Exhaust, Msr front mounts. Current map flashed is V2 93 oct.
	Appreciate 0

03-21-2019, 06:41 AM	#32
rgb129 Private 20 Rep 52 Posts Drives: '14 M5 CP Join Date: Mar 2013 Location: Nashville iTrader: (0)	I haven't noticed anything like that. If anything I feel a surge around 5k rpms in 3rd.
	Appreciate 0

03-21-2019, 12:36 PM	#33
Dumpspec Major 570 Rep 1,234 Posts Drives: @dumpspec Join Date: Apr 2014 Location: Bay Area iTrader: (12)	i also spoke to the guys from openflash and they haven't had any experience as the one im having. we are working together to try and solve this issue. luckily i'm local so Shiv will be able to put my car on the dyno and work on it. will keep everyone updated.
	Appreciate 0

03-22-2019, 09:55 AM	#34
Somy6 Second Lieutenant 65 Rep 229 Posts Drives: 2014 BMW Monte Carlo Blue M5 Join Date: Sep 2012 Location: Arizona iTrader: (1)	I was getting a cel on car would go into limp mode on V2 so I switched back to V1.2. I never ran the codes to why the car was going into limp mode so I still need to do that and perhaps try again.
	Appreciate 0

03-26-2019, 02:24 PM	#36
romieromes New Member 0 Rep 16 Posts Drives: 2013 M5 Join Date: Sep 2018 Location: Washington DC iTrader: (0)	I'm looking into buying the OFT. Thing is, I have a F10 M5 6MT. I'm curious about the following: - How many OTS maps are available for the F10 M5 and are they compatible with my 6MT? - Can you block the o2 CEL when running catless DP's and still pass emmissions? Thanks! __________________ 2013 F10 M5 \| Black Sapphire \| Black Merino \| 6MT 1995 E36 M3 \| Daytona Violet \| Light Grey Nappa \| 5MT Last edited by romieromes; 03-26-2019 at 02:36 PM..
	Appreciate 0

03-27-2019, 01:13 PM	#40
rgb129 Private 20 Rep 52 Posts Drives: '14 M5 CP Join Date: Mar 2013 Location: Nashville iTrader: (0)	My check engine light came on yesterday after some spirited driving, but no WOT. The OFT didn't read any codes. I am going to hook it up to my laptop if it is still there today.
	Appreciate 0

03-27-2019, 02:25 PM	#41
ByronUT_M6 Private 13 Rep 84 Posts Drives: '13 Sakhir Orange M6 Join Date: Jun 2017 Location: Utah iTrader: (0)	Those of you who are having issues with the V2 tune do you all have m5s? If so what year is your m5? Is anyone having issues with the tune on their m6? Thanks
	Appreciate 0