part number ECU tower/brace

ArkhamM5 · 12-04-2022, 04:10 PM

Was taking apart the car to assess my waste gate rattle. The DME bracket was missing a bolt and one of them was an Allen key like the fuel pump heat shield but all those bolts were present. Would like to get the correct bolts for the tower if someone could point me in the right direction. Thank you

M5Rick · 12-05-2022, 08:20 AM

When dealer did my spark plugs he said those DME bracket bolts need changing when removed, can't be re-used. I'd go to dealer and get all new ones.

Rated M Roadster · 12-05-2022, 02:53 PM

Quote:

Originally Posted by M5Rick

When dealer did my spark plugs he said those DME bracket bolts need changing when removed, can't be re-used. I'd go to dealer and get all new ones.

Can absolutely be reused.

OP, get the part number off realoem.

M5Rick · 12-06-2022, 04:49 AM

Quote:

Originally Posted by Rated M Roadster

Can absolutely be reused.

OP, get the part number off realoem.

If one or more re-used ones drop off into the engine confines it could bring on more than a rattle.

Rated M Roadster · 12-06-2022, 11:02 AM

Quote:

Originally Posted by M5Rick

Quote:

Originally Posted by Rated M Roadster

Can absolutely be reused.

OP, get the part number off realoem.

If one or more re-used ones drop off into the engine confines it could bring on more than a rattle.

Irrelevant to the fact that they can be reused.

M5Rick · 12-06-2022, 06:22 PM

Quote:

Originally Posted by Rated M Roadster

Irrelevant to the fact that they can be reused.

He replaced mine free of charge as they looked worn

ArkhamM5 · 12-08-2022, 05:58 PM

Quote:

Originally Posted by Rated M Roadster

Can absolutely be reused.

OP, get the part number off realoem.

Was on real OEM couldnt find the piece. Maybe im not using the proper vocab?

ArkhamM5 · 12-08-2022, 06:17 PM

Lamda probe bracket

https://www.realoem.com/bmw/enUS/sho...49#11157590624

07129904819 38 cents each.

Who ever named that is a moron lol the O2 sensors barely clip on

12-04-2022, 04:10 PM	#1
ArkhamM5 New Member 20 Rep 14 Posts Drives: M5 Join Date: Jul 2022 Location: Eastern iTrader: (0)	part number ECU tower/brace Was taking apart the car to assess my waste gate rattle. The DME bracket was missing a bolt and one of them was an Allen key like the fuel pump heat shield but all those bolts were present. Would like to get the correct bolts for the tower if someone could point me in the right direction. Thank you
	Appreciate 0 Tweet Quote

12-05-2022, 08:20 AM	#2
M5Rick Lieutenant General 39750 Rep 14,033 Posts Drives: M5 F10 DCT Gunmetal Join Date: Aug 2018 Location: Southern England iTrader: (0) Garage List '11 Honda Type S VTEC [0.00] '10 CLK200k S cabrio [0.50]	When dealer did my spark plugs he said those DME bracket bolts need changing when removed, can't be re-used. I'd go to dealer and get all new ones. Last edited by M5Rick; 12-05-2022 at 08:38 AM..
	Appreciate 0 Quote

12-08-2022, 06:17 PM	#8
ArkhamM5 New Member 20 Rep 14 Posts Drives: M5 Join Date: Jul 2022 Location: Eastern iTrader: (0)	Lamda probe bracket https://www.realoem.com/bmw/enUS/sho...49#11157590624 07129904819 38 cents each. Who ever named that is a moron lol the O2 sensors barely clip on
	Appreciate 0 Quote

Thread Tools	Search this Thread
Show Printable Version Email this Page	Search this Thread: Advanced Search