What did you do to your M5 today?

[vafan13]

Originally Posted by Passi-M5

Which springs did you install?

I'm on KW V3 coilovers, dropped ~20mm in rear and ~25mm in front, or 10mm and 15mm lower than a comp pack car.

[Passi-M5]

Originally Posted by vafan13

I'm on KW V3 coilovers, dropped ~20mm in rear and ~25mm in front, or 10mm and 15mm lower than a comp pack car.

Ok nice
Thank you for the infos

[SlimM5]

Dropped my M5 in to the dealer for some warranty work and got this beauty as a loaner. I'm really liking this 330i. Would make a great daily.

[TaboutWEALTH]

Originally Posted by chadillac2000

I’ve been busy online collecting parts that I can install this spring - some larger than others. The big ticket item arrived today: a set of custom Alpine White finished CSF charge coolers. The OEM charge coolers had always been an unsightly item in the engine bay for me, but getting an improvement in efficiency is the ultimate goal. Don’t get me wrong, not a great bang for your buck purchase, but these things look absolutely killer. There are other, less expensive options that essentially do the same thing, but I wanted something proven.

From my initial email to CSF, I had these in my hands less than 2 weeks later. Very impressed with these guys and the top-notch quality is quite clear -- both the charge coolers themselves, as well as the powder coat job and color match. This is what $2,495 + $200 custom color upcharge will get you.

How does the Dinan intake compare to Project Gamma as far as sound difference?

[vafan13]

Passed 50K miles while driving up to our vacation spot. Not bad at all for a 9-year-old car, but a little bittersweet. Still, the miles I've put on it have been great!

[TaboutWEALTH]

Originally Posted by M5_Raz

Installed Project Gamma intakes. Very noticeable power increase, better throttle response, and the sound is insane in the mid range of RPMs.

The install itself was not bad. I had the most trouble getting the filters in correctly and tightly fitted.

Here are some pics:

Do you know what size the Tbolt clamps are on the Intake?

[M5_Raz]

Not exactly. The intakes have a 3.5 in interior diameter so you can use a 2.5-4.5 in hose clamp.

[TaboutWEALTH]

Originally Posted by M5_Raz

Not exactly. The intakes have a 3.5 in interior diameter so you can use a 2.5-4.5 in hose clamp.

Thanks, seen your car at eurofest looks good

[M5_Raz]

Originally Posted by TaboutWEALTH

Thanks, seen your car at eurofest looks good

Thank bro, did you bring yours? I was surprised to see so many m5's

[TaboutWEALTH]

Originally Posted by yehm5

Got the car wrapped (car is BSM) and installed Vorsteiner front spoiler, rear diffuser and trunk spoiler

What lip and Spoiler is that? Also what rims?

looks super clean

[M5_Raz]

Got an oil change done. 2,500 miles and 6 months since the last one.

[SCD-1983]

Installed BMW Motorsport 50 years anniversary badges 🤩

[M5Rick]

Originally Posted by SCD-1983

Installed BMW Motorsport 50 years anniversary badges 🤩

I saw those badges for sale at a BMW dealers shop while waiting for my car completing an oil service.

[M5Rick]

Roof spoiler arrived today and all fitted

[///M Power-Belgium]

Originally Posted by M5Rick

Roof spoiler arrived today and all fitted

Looks fantastic . Well done my friend !

[M5Rick]

Another pic

[///M Power-Belgium]

Originally Posted by M5Rick

Another pic

In one word : "Perfection" !

[TaboutWEALTH]

Installed LED Door Projectors

[M5Rick]

Originally Posted by ///M Power-Belgium

In one word : "Perfection" !

Been thinking about those '50 year motorsport' bonnet and boot badges mentioned earlier by SC-1983, I would need both the 82mm for front and back and plenty online though caution needed to get them for your specific model as backing extension lugs are different for specific models.
My present BMW badges front and back are getting a little scabby around the outside border which is surprising for OE badges so I am tempted in replacing them even for those with non OE spec seing the OE ones are affected by wear and tear after a time.

[SCD-1983]

Originally Posted by M5Rick

Been thinking about those '50 year motorsport' bonnet and boot badges mentioned earlier by SC-1983, I would need both the 82mm for front and back and plenty online though caution needed to get them for your specific model as backing extension lugs are different for specific models.
My present BMW badges front and back are getting a little scabby around the outside border which is surprising for OE badges so I am tempted in replacing them even for those with non OE spec seing the OE ones are affected by wear and tear after a time.

Front and rear badges for F10/F11 5 series are different. The front ones have 2 positioning holes and are glued, the rear ones are with 2 pins on the outer edges and are not glued.

[M5Rick]

Originally Posted by SCD-1983

Front and rear badges for F10/F11 5 series are different. The front ones have 2 positioning holes and are glued, the rear ones are with 2 pins on the outer edges and are not glued.

Thanks for that info SCD-1983.

[HXS]

Painted my Meisterschaft tips black!