02-26-2020, 03:59 AM | #1 |
Private First Class
75
Rep 104
Posts |
H&R Springs/Tyre's/Spacers
I am looking to purchase the following and need some advice.
H&R Springs: Front: 25mm Rear: 15mm https://www.ebay.co.uk/itm/BMW-M5-F1...MAAOSwcENc8tSL Tyres: (Michelin Pilot Sport 4) Front: 265/35/20 Rear: 305/30/20 Spacers: Initially my thoughts have been 12mm all round, however this is what I am unsure on, would I require any spacers with the setup above? If so, what size without rubbing/scraping. Just want that nice stance with no issues. Please advise and if anyone has any pictures with the setup above please share. thank you in advance |
02-26-2020, 12:27 PM | #3 |
Private First Class
75
Rep 104
Posts |
Thanks for the reply. I want to avoid rubbing, im thinking i may not require spacers lowered on 305's for the rear but may require them for the front to poke them out a little.
|
Appreciate
0
|
02-26-2020, 12:40 PM | #4 | |
Brigadier General
5706
Rep 4,209
Posts
Drives: '13 F10 M5 | '15 F15 X5
Join Date: Jul 2015
Location: Seattle, WA
|
Quote:
I'm lowered and I have 10mm spacers all the way around with stock tire sizes. I think you'll want 10/12mm in the front and if you are running 305 in the rear, you might not need spacers. I'd recommend first getting the car lowered, waiting about a week to make sure the springs have settled and then measure the gap. |
|
Appreciate
0
|
02-26-2020, 12:43 PM | #5 | ||
Private First Class
75
Rep 104
Posts |
Quote:
|
||
Appreciate
0
|
03-01-2020, 08:46 PM | #11 |
Private First Class
177
Rep 149
Posts |
I'm on the same springs. i run 315 PS4s with 5mm spacers in the rear. no rubbing at all. honestly looks like i could run a 10mm spacer with those 315s without rubbing also.
|
Appreciate
0
|
Post Reply |
Bookmarks |
Thread Tools | Search this Thread |
|
|