M5POST
BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M5POST - BMW M5 Forum > F10 M5 Forum > Navigation, iDrive, Audio, Video, Bluetooth, Phone, Coding

Post Reply
 
Thread Tools Search this Thread
      09-05-2018, 08:57 AM   #1
black_F10M5
Lieutenant
black_F10M5's Avatar
284
Rep
499
Posts

Drives: F10 M5
Join Date: Jan 2016
Location: NJ

iTrader: (1)

Bimmercode - coding mirrors to fold on lock?

Hi guys, I've recently picked up the Bimmercode app and so far have only used it to turn off my ASD.

Is there somewhere in there that will cause the mirrors to fold when I lock the car? I've done some searching and haven't found it but I am still new to coding and probably missed it somewhere lol.

Any other "must-do's" in regards to coding through Bimmercode?

Thanks
Appreciate 0
      09-05-2018, 10:19 AM   #2
Lightfytr
Private
United_States
57
Rep
67
Posts

Drives: 2017 750ix 2014 M5 Competition
Join Date: Aug 2018
Location: San Antonio, TX

iTrader: (0)

I did all my coding with Carly. I believe they are similar in coding ability. I removed the warnings for nav, added video in motion, trunk close with remote, trunk close with footwell sensor, windows and sunroof close with remote, added turn signal in HUD, and some other small stuff. Good luck.
Appreciate 2
Ickdeep5706.00
      09-05-2018, 02:52 PM   #3
SapphireM5
Major
SapphireM5's Avatar
710
Rep
1,107
Posts

Drives: 2013 M5 Sapphire Black
Join Date: Feb 2017
Location: New Jersey

iTrader: (3)

There is coding through bimmercode to do the mirrors. I coded mine to fold in with the key fob once I hit lock and hold the button for a few sec. Also coded to have the windows and sunroof close and open with the key fob. I have to find the setting though for you.
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
Appreciate 1
      09-06-2018, 06:40 PM   #4
black_F10M5
Lieutenant
black_F10M5's Avatar
284
Rep
499
Posts

Drives: F10 M5
Join Date: Jan 2016
Location: NJ

iTrader: (1)

Quote:
Originally Posted by SapphireM5 View Post
There is coding through bimmercode to do the mirrors. I coded mine to fold in with the key fob once I hit lock and hold the button for a few sec. Also coded to have the windows and sunroof close and open with the key fob. I have to find the setting though for you.
thank you, that is exactly what I am looking for with the mirrors folding on lock. I will take a look this weekend to see if I can find it in bimmercode.
Appreciate 0
      09-06-2018, 06:43 PM   #5
SapphireM5
Major
SapphireM5's Avatar
710
Rep
1,107
Posts

Drives: 2013 M5 Sapphire Black
Join Date: Feb 2017
Location: New Jersey

iTrader: (3)

Quote:
Originally Posted by black_F10M5 View Post
thank you, that is exactly what I am looking for with the mirrors folding on lock. I will take a look this weekend to see if I can find it in bimmercode.
CAS / KOMFORTSCHLIESSUNG_FB = aktiv
CAS / KOMFORTSCHLIESSUNG_PA = aktiv
FRM / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

Also, if you don't want a delay in closing, you also need to code this:

CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
Appreciate 0
      09-06-2018, 06:49 PM   #6
black_F10M5
Lieutenant
black_F10M5's Avatar
284
Rep
499
Posts

Drives: F10 M5
Join Date: Jan 2016
Location: NJ

iTrader: (1)

Quote:
Originally Posted by SapphireM5 View Post
Quote:
Originally Posted by black_F10M5 View Post
thank you, that is exactly what I am looking for with the mirrors folding on lock. I will take a look this weekend to see if I can find it in bimmercode.
CAS / KOMFORTSCHLIESSUNG_FB = aktiv
CAS / KOMFORTSCHLIESSUNG_PA = aktiv
FRM / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

Also, if you don't want a delay in closing, you also need to code this:

CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00
Quote:
Originally Posted by SapphireM5 View Post
Quote:
Originally Posted by black_F10M5 View Post
thank you, that is exactly what I am looking for with the mirrors folding on lock. I will take a look this weekend to see if I can find it in bimmercode.
CAS / KOMFORTSCHLIESSUNG_FB = aktiv
CAS / KOMFORTSCHLIESSUNG_PA = aktiv
FRM / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

Also, if you don't want a delay in closing, you also need to code this:

CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00
Thanks so much. So I assume I need to do this in expert mode?
__________________
2016 M5 | Instagram: @black_f10m5

IND cosmetic | M Performance , RKP , 3D Design aero | Eisenmann Race exhaust | AMS catted downpipes | MSR intake | CSF charge coolers | DME Stage 2 tune | KW v3 coilovers | BBS FI | Michelin Pilot Sport 4S
Appreciate 0
      09-06-2018, 06:51 PM   #7
SapphireM5
Major
SapphireM5's Avatar
710
Rep
1,107
Posts

Drives: 2013 M5 Sapphire Black
Join Date: Feb 2017
Location: New Jersey

iTrader: (3)

Quote:
Originally Posted by black_F10M5 View Post
Thanks so much. So I assume I need to do this in expert mode?
Yes, expert mode. You set the value for the delay or how long you have to press the lock to fold the mirrors. If you want it as soon as you hit the lock, then put in wert 00. 1/4 second wert 02.
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
Appreciate 0
      09-06-2018, 07:00 PM   #8
black_F10M5
Lieutenant
black_F10M5's Avatar
284
Rep
499
Posts

Drives: F10 M5
Join Date: Jan 2016
Location: NJ

iTrader: (1)

Quote:
Originally Posted by SapphireM5 View Post
Quote:
Originally Posted by black_F10M5 View Post
Thanks so much. So I assume I need to do this in expert mode?
Yes, expert mode. You set the value for the delay or how long you have to press the lock to fold the mirrors. If you want it as soon as you hit the lock, then put in wert 00. 1/4 second wert 02.
Quote:
Originally Posted by SapphireM5 View Post
Quote:
Originally Posted by black_F10M5 View Post
Thanks so much. So I assume I need to do this in expert mode?
Yes, expert mode. You set the value for the delay or how long you have to press the lock to fold the mirrors. If you want it as soon as you hit the lock, then put in wert 00. 1/4 second wert 02.
This is so helpful, thank you
__________________
2016 M5 | Instagram: @black_f10m5

IND cosmetic | M Performance , RKP , 3D Design aero | Eisenmann Race exhaust | AMS catted downpipes | MSR intake | CSF charge coolers | DME Stage 2 tune | KW v3 coilovers | BBS FI | Michelin Pilot Sport 4S
Appreciate 0
      09-15-2018, 09:41 PM   #9
jamier2
New Member
1
Rep
19
Posts

Drives: 2016 M5
Join Date: Jul 2018
Location: Kentucky

iTrader: (0)

I did mine with Bimmercode, and was able to do it without going into expert mode. I still haven't even tried that part yet. I don't remember how I did it exactly but it was pretty easy.

I also tried to get the turn signals to show up on the heads up display but even though the Bimmercode said it was coded it still doesn't work for me. I guess I'll have to open up the expert mode to get that one to work.
__________________
2016 M5
Appreciate 0
      09-16-2018, 04:59 PM   #10
SapphireM5
Major
SapphireM5's Avatar
710
Rep
1,107
Posts

Drives: 2013 M5 Sapphire Black
Join Date: Feb 2017
Location: New Jersey

iTrader: (3)

Quote:
Originally Posted by jamier2 View Post
I did mine with Bimmercode, and was able to do it without going into expert mode. I still haven't even tried that part yet. I don't remember how I did it exactly but it was pretty easy.

I also tried to get the turn signals to show up on the heads up display but even though the Bimmercode said it was coded it still doesn't work for me. I guess I'll have to open up the expert mode to get that one to work.
When I did my turn signals for my HUD I think I had to change the settings in two different areas. Ill see if I can find it.
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
Appreciate 0
      09-16-2018, 05:11 PM   #11
SapphireM5
Major
SapphireM5's Avatar
710
Rep
1,107
Posts

Drives: 2013 M5 Sapphire Black
Join Date: Feb 2017
Location: New Jersey

iTrader: (3)

Here is the cheat sheet I used:

https://f10.m5post.com/forums/showthread.php?t=907307
__________________
'13 Black Sapphire Metallic - BPM Stage 1 Tune - RPI Exhaust - KW HAS Kit - 12mm spacers all around- Carbon Fiber front lip - High Kick Trunk Spoiler - Rear Roof Spoiler - IND Kidney and Fender Grills - 20% Tint all around 50% Front Windshield - PPF
Appreciate 0
      09-20-2018, 04:02 PM   #12
TLK
First Lieutenant
TLK's Avatar
108
Rep
384
Posts

Drives: '14 M5 CP, '12 550i, '04 545i
Join Date: Sep 2016
Location: SF Bay, CA

iTrader: (0)

Quote:
Originally Posted by jamier2 View Post
I did mine with Bimmercode, and was able to do it without going into expert mode. I still haven't even tried that part yet. I don't remember how I did it exactly but it was pretty easy.

I also tried to get the turn signals to show up on the heads up display but even though the Bimmercode said it was coded it still doesn't work for me. I guess I'll have to open up the expert mode to get that one to work.
I think the turn signals can only be seen in hud if you don't use M View. I always drive with M View enabled since I use the paddles full time in S3 mode. Unfortunately M View turns off almost everything that can show in the HUD...
Appreciate 0
      09-23-2018, 11:21 AM   #13
jamier2
New Member
1
Rep
19
Posts

Drives: 2016 M5
Join Date: Jul 2018
Location: Kentucky

iTrader: (0)

Quote:
Originally Posted by SapphireM5 View Post
Thanks for that.
__________________
2016 M5
Appreciate 0
      09-23-2018, 11:23 AM   #14
jamier2
New Member
1
Rep
19
Posts

Drives: 2016 M5
Join Date: Jul 2018
Location: Kentucky

iTrader: (0)

Quote:
Originally Posted by TLK View Post
I think the turn signals can only be seen in hud if you don't use M View. I always drive with M View enabled since I use the paddles full time in S3 mode. Unfortunately M View turns off almost everything that can show in the HUD...
Cool. I generally drive with the non M view, just have that set up for the M2 button where everything is at the max. Day to day I use the non-M HUD view. With the steering wheel position I like I can't see the turn signal display.
__________________
2016 M5
Appreciate 0
      05-05-2019, 02:03 PM   #15
BMW_driver_2008
Private
BMW_driver_2008's Avatar
United_States
5
Rep
74
Posts

Drives: BMW M6
Join Date: May 2017
Location: USA

iTrader: (1)

My mirrors were folding with a long press on the FOB after bimmercoding.
I then entered a wert of 00 in expert mode and they stopped folding.
I loaded the backup and they folded with a long press.
I am in a 2016 550i drive not an M5 but cannot figure out how to get the mirrors to fold with just a short press on the fob or the comfort access button.
Appreciate 0
      05-06-2019, 10:54 PM   #16
arucano
Captain
arucano's Avatar
United_States
249
Rep
626
Posts

Drives: 2014 M6 Grand Coupe CP
Join Date: May 2017
Location: Kingwood TX

iTrader: (0)

Garage List
2014 BMW M6 GC  [10.00]
In bimmercode:
Front Electronic Module (FEM-01)
Scroll down to MIRRORS
Here you will find several options.

Good luck
__________________
F06 M6 Grand Coupe CP
Sapphire Black Metallic
The drive is the destination
Appreciate 0
      01-11-2020, 06:02 PM   #17
NZ-M340ixDrive
Private First Class
New Zealand
27
Rep
124
Posts

Drives: 2020 M340i xDrive
Join Date: Apr 2017
Location: Auckland

iTrader: (0)

Garage List
Quote:
Originally Posted by SapphireM5 View Post
CAS / KOMFORTSCHLIESSUNG_FB = aktiv
CAS / KOMFORTSCHLIESSUNG_PA = aktiv
FRM / ASP_BEIKLAPPEN_BEI_KOMFORTSCHLIESSEN = aktiv

Also, if you don't want a delay in closing, you also need to code this:

CAS->3003 FH MASTER->KMFRT_SCHLIESSEN->Werte=00
This helped lots but my one touch with wing mirrors only works with the comfort access not the button.
Who knows how to code windows up with one touch
Thanks again
Appreciate 0
      01-17-2020, 12:43 PM   #18
texsn95
Private First Class
56
Rep
145
Posts

Drives: 2014 Frozen Silver M5
Join Date: Feb 2016
Location: Houston

iTrader: (0)

Going to pick up my CP 2014 M5 today, and downloaded bimmercode and ordered this adapter
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1

Question, can I run Inpa from my laptop using bluetooth, or do I have get a cable like this one to run PC programs?

https://www.amazon.com/OTKEFDI-Enet-.../dp/B07XND685R

Coming from an 06 I'm way behind the curve on the F10s.
Appreciate 0
Post Reply

Bookmarks

Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off



All times are GMT -5. The time now is 04:56 PM.




m5post
Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST