Bimmercode Help with Trunk Close and AC

[Vancouver_M440]

There's been a few things I wanted to change using Bimmercode and i can't seem to get it work.

1. Trunk close via remote or the trunk open button - looks straight forward enough as it's not even a thing you need to use Expert mode for but it fails reading the ECU data from the module. Anyone else experience this and found a work around? Mine gets to about 90% read and then errors out

2. Keep AC off when I start the car - I toggled the AC off options but my AC still turns on everytime I start the car. Is there something else that needs to done here?

3. Turn off easy entry so the steering wheels doesn't go up and down everytime I start and stop the engine - Not sure if this needs to be coded but I can't find a way to do it in the iDrive

[PRKELLY]

For the trunk,. try enabling slow data rate. I think thats what its called.

Not sure on AC, mine worked fine when I coded it.

The steering wheel will need coding, I do not thin thats an iDrive option.

[SapphireM5]

Here is the cheat sheet I used:

https://f10.m5post.com/forums/showthread.php?t=907307