Official Built Motor F10 M5 thread

KMORGSM5 · 10-20-2018, 12:58 AM

Rimless M5

finlandm5f10 · 12-08-2018, 08:19 AM

Hmmm.... And how much power is it? Or this two gentlemans?? Or some issues...?

_BSMM5 · 04-29-2019, 10:32 AM

Where is the best place to purchase rod bearings and pistons if I'm looking to replace? Does BPC sell only the Rod bearings and Piston?

Chaman · 05-05-2019, 10:07 AM

Quote:

Originally Posted by KMORGSM5

Few more pics

Are you spraying into the intercoolers and before the turbos as well?

Chaman · 04-15-2020, 08:24 AM

Figured I would bump this thread since mine is done.

Got a built motor from Troy Jeup in the beginning of the year and finally got to installing it.

91mm 10:1 cp pistons
Carillo rods with extra side clearance
King bearings

Has all supporting mods. Turbos will be xonarotor 67mm from Silly Rabbit

Put 10 miles on it so far since getting it back and the car is totally transformed in just that short time driving it, it’s apparent that there will be a learning curve at full power.

jsnm · 04-15-2020, 08:27 AM

Quote:

Originally Posted by Chaman

Figured I would bump this thread since mine is done.

Got a built motor from Troy Jeup in the beginning of the year and finally got to installing it.

91mm 10:1 cp pistons
Carillo rods with extra side clearance
King bearings

Has all supporting mods. Turbos will be xonarotor 67mm from Silly Rabbit

Put 10 miles on it so far since getting it back and the car is totally transformed in just that short time driving it, it’s apparent that there will be a learning curve at full power.

I would def like to hear some more feedback in how your motor is doing.
I keep seeing all these builds but really no feedback or longevity of them.

Chaman · 04-15-2020, 08:41 AM

Quote:

Originally Posted by jsnm

I would def like to hear some more feedback in how your motor is doing.
I keep seeing all these builds but really no feedback or longevity of them.

As soon as I have something to share I absolutely will.

So far I have 10 miles on it but the car is a whole different animal now

jsnm · 04-15-2020, 08:58 AM

Great,thank you

Chaman · 04-15-2020, 01:40 PM

Quote:

Originally Posted by jsnm

Great,thank you

No problem!

Looking forward to sharing the experience

ckroeger · 04-15-2020, 05:05 PM

Quote:

Originally Posted by KMORGSM5

This was the other day, 105deg and couldn't get JB4 additive to add boost. This was MS-109 at 22psi. Now it's 8XX whp, 1,XXX wtq. Will post graph soon.

Car fucking moves!

Just put these on, now time for some bigger turbos! Still in stock housings for now.

What modification were made to the transmission?

KMORGSM5 · 04-16-2020, 09:12 PM

Quote:

Originally Posted by ckroeger

Quote:

Originally Posted by KMORGSM5

This was the other day, 105deg and couldn't get JB4 additive to add boost. This was MS-109 at 22psi. Now it's 8XX whp, 1,XXX wtq. Will post graph soon.

Car fucking moves!

Just put these on, now time for some bigger turbos! Still in stock housings for now.

What modification were made to the transmission?

Had new DCT installed along with SSP 20 plate clutch pack, Billet baskets and SSP DCT cooking kit.

Chaman · 04-18-2020, 10:18 AM

Went on my first real drive in the car and it’s a whole new animal.

Chaman · 04-26-2020, 06:33 PM

At 300 miles with the build and it’s running great so far. About to change out the first run oil with another round of break in oil.

500 more miles of mild driving then I will change to 5w50 redline and let it rip

Upgraded turbos come back some time the week of may 1. Xonarotor 67mm

jsnm · 04-27-2020, 03:02 PM

Quote:

Originally Posted by Chaman

At 300 miles with the build and it’s running great so far. About to change out the first run oil with another round of break in oil.

500 more miles of mild driving then I will change to 5w50 redline and let it rip

Upgraded turbos come back some time the week of may 1. Xonarotor 67mm

Very nice glad to hear some feedback so far can't wait to see how it does w the turbos

Chaman · 04-27-2020, 11:26 PM

Same!!

Chaman · 06-06-2020, 09:46 AM

Motor break in is complete changing to 5w50 oil this week!

Time for all the sauce!

Chaman · 07-25-2020, 11:15 PM

Over 1000 miles now on built engine.

Introduced methanol and the car loved it.

The bms tank I got is a piece of shit though and leaks so I got a proper one coming next week

Maxixt · 07-26-2020, 11:15 AM

Hello to everyone, few words about my build:
Stock bore
Custom sleeves
Dp rods
Je pistons 9,3:1
Acl rod bearings
Arp head studs
Ported heads
Ceramic coated headers

Maxixt · 07-26-2020, 11:21 AM

Also found in Russia one guy who making cold thermostats , now car runs on 92c , some more pics.

Maxixt · 07-26-2020, 11:25 AM

Some more

Maxixt · 07-26-2020, 11:27 AM

About 2000km after engine build, now waiting for garrett factory will open to get 2x g25-660,csf coolers , meth already waiting on shelf.

wallyman424 · 07-27-2020, 10:56 AM

You added a real dip stick to the motor! By far the best mod I've ever seen.

10-20-2018, 12:58 AM	#199
KMORGSM5 Captain 320 Rep 843 Posts Drives: 14 CP M5 Join Date: Feb 2016 Location: South Florida iTrader: (0)	Rimless M5 Attached Images
	Appreciate 1 M4_Ronin479.50 Quote

12-08-2018, 08:19 AM	#200
finlandm5f10 Second Lieutenant 24 Rep 222 Posts Drives: BMW M5 F10&Audi RS6 C7 2016 Join Date: Aug 2017 Location: Finland iTrader: (0)	Hmmm.... And how much power is it? Or this two gentlemans?? Or some issues...?
	Appreciate 0 Quote

04-29-2019, 10:32 AM	#201
_BSMM5 Second Lieutenant 124 Rep 238 Posts Drives: 2015 M3 Join Date: Sep 2017 Location: Somewhere in Texas iTrader: (0) Garage List 2007 BMW 335i [0.00]	Where is the best place to purchase rod bearings and pistons if I'm looking to replace? Does BPC sell only the Rod bearings and Piston?
	Appreciate 0 Quote

04-15-2020, 08:24 AM	#203
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	Figured I would bump this thread since mine is done. Got a built motor from Troy Jeup in the beginning of the year and finally got to installing it. 91mm 10:1 cp pistons Carillo rods with extra side clearance King bearings Has all supporting mods. Turbos will be xonarotor 67mm from Silly Rabbit Put 10 miles on it so far since getting it back and the car is totally transformed in just that short time driving it, it’s apparent that there will be a learning curve at full power.
	Appreciate 0 Quote

04-15-2020, 08:58 AM	#206
jsnm Banned 70 Rep 84 Posts Drives: F10,F30,E90 Join Date: Oct 2018 Location: DE iTrader: (5)	Great,thank you
	Appreciate 0 Quote

04-18-2020, 10:18 AM	#210
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	Went on my first real drive in the car and it’s a whole new animal.
	Appreciate 0 Quote

04-26-2020, 06:33 PM	#211
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	At 300 miles with the build and it’s running great so far. About to change out the first run oil with another round of break in oil. 500 more miles of mild driving then I will change to 5w50 redline and let it rip Upgraded turbos come back some time the week of may 1. Xonarotor 67mm
	Appreciate 1 jsnm70.00 Quote

04-27-2020, 11:26 PM	#213
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	Same!!
	Appreciate 0 Quote

06-06-2020, 09:46 AM	#214
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	Motor break in is complete changing to 5w50 oil this week! Time for all the sauce!
	Appreciate 0 Quote

07-25-2020, 11:15 PM	#215
Chaman Private First Class 45 Rep 103 Posts Drives: 2015 M5 CP Join Date: Mar 2019 Location: Far Nor Cal iTrader: (0)	Over 1000 miles now on built engine. Introduced methanol and the car loved it. The bms tank I got is a piece of shit though and leaks so I got a proper one coming next week
	Appreciate 0 Quote

07-26-2020, 11:15 AM	#216
Maxixt Enlisted Member 20 Rep 32 Posts Drives: M6 f13 Join Date: Jul 2020 Location: Latvia,Riga iTrader: (0)	Hello to everyone, few words about my build: Stock bore Custom sleeves Dp rods Je pistons 9,3:1 Acl rod bearings Arp head studs Ported heads Ceramic coated headers Attached Images
	Appreciate 0 Quote

07-26-2020, 11:21 AM	#217
Maxixt Enlisted Member 20 Rep 32 Posts Drives: M6 f13 Join Date: Jul 2020 Location: Latvia,Riga iTrader: (0)	Also found in Russia one guy who making cold thermostats , now car runs on 92c , some more pics. Attached Images
	Appreciate 0 Quote

07-26-2020, 11:25 AM	#218
Maxixt Enlisted Member 20 Rep 32 Posts Drives: M6 f13 Join Date: Jul 2020 Location: Latvia,Riga iTrader: (0)	Some more Attached Images
	Appreciate 0 Quote

07-26-2020, 11:27 AM	#219
Maxixt Enlisted Member 20 Rep 32 Posts Drives: M6 f13 Join Date: Jul 2020 Location: Latvia,Riga iTrader: (0)	About 2000km after engine build, now waiting for garrett factory will open to get 2x g25-660,csf coolers , meth already waiting on shelf.
	Appreciate 0 Quote

07-27-2020, 10:56 AM	#220
wallyman424 Private 40 Rep 65 Posts Drives: 2014 CP M5 Join Date: Apr 2018 Location: FL iTrader: (0)	You added a real dip stick to the motor! By far the best mod I've ever seen.
	Appreciate 1 m5rosco210.50 Quote