Random question about Roundels for F10's

[A3ch]

So I replaced all of my Roundels with 50th anniversary ones but the hood is becoming a pain in the ass.

According to most documentation its the 82MM with 2 prongs (P/N: 51-11-7-886-545).

My hood has the prongs so the emblem would have to be female (accept said prongs). The only part number I think works is for (P/N: 51147057794):

6 Series
E63 / E64 (04-10) > 645Ci
E63 / E64 (04-10) > 650i
E63 / E64 (04-10) > M6
6 Series
F12 / F13 (12-18) > 640i
F12 / F13 (12-18) > 650i
F12 / F13 (12-18) > 650i xDrive
F12 / F13 (12-18) > M6
Z Series
E85 / E86 Z4 (03-08) > Z4 2.5i M54
E85 / E86 Z4 (03-08) > Z4 3.0i M54
E85 / E86 Z4 (03-08) > Z4 3.0i N52
E85 / E86 Z4 (03-08) > Z4 3.0si N52
E85 / E86 Z4 (03-08) > Z4 M

The vendor I was working was CERTAIN the former was correct and not the latter until I showed him pictures of my bumper (which is OEM).

Anyone know the RIGHT partnumber to look for to replace the BUMPER/HOOD with the 50th anniversary Roundel?

These partnumbers are a pain in the ass sometimes

[A3ch]

For anyone scouring the internet they may have the same issue I found this partnumber:
51148087189

From this post:
https://g80.bimmerpost.com/forums/sh...&postcount=129

[DayvG]

Originally Posted by A3ch

For anyone scouring the internet they may have the same issue I found this partnumber:
51148087189

From this post:
https://g80.bimmerpost.com/forums/sh...&postcount=129

Hey mate, was the fit ok for this?