|
Post Reply |
|
Thread Tools | Search this Thread |
08-08-2022, 09:55 PM | #1 |
Private
21
Rep 90
Posts |
is there special "diagnostic mode" to have my ISTA connect to F10 m5?
hi. I just purchased F10 M5. I have had E60 M5. My ISTA connects just fine to E60 but wouldn't read vehicle information on the F10. I'm using bimmergeeks cable. The error window mention something about diagnostic/testing mode. Is there a special mode I need to set on F10 M5 to be able to be read by ISTA computer?
Thanks in advance. sorry for multiple posts. seemed unrelated. |
08-09-2022, 10:46 PM | #4 |
Private
21
Rep 90
Posts |
I'm using Pro K+DCAN cable. It says F-chassis should work on the website. The setting should be correct since it works with my e60 m5. I ordered Carly a week ago, so when it gets here, I'll try again. Any advice would be appreciated.
|
Appreciate
0
|
08-09-2022, 11:10 PM | #5 |
First Lieutenant
171
Rep 349
Posts |
Pretty sure you need an additional adaptor to use that cable with an F series or newer car (like their ProTool adaptor). Or just use an ENET cable.
|
Appreciate
0
|
08-12-2022, 02:25 AM | #8 |
First Lieutenant
171
Rep 349
Posts |
|
Appreciate
0
|
Post Reply |
Bookmarks |
|
|