BMW Garage BMW Meets Register Search Today's Posts Mark Forums Read

Go Back   M5POST - BMW M5 Forum > F10 M5 Forum > F10 M5 DIY Guides

Post Reply
Thread Tools Search this Thread
      02-01-2018, 02:46 PM   #1

Drives: F90 M5
Join Date: Sep 2008
Location: UK

iTrader: (0)

P3 Gauge fitting

Pretty easy, only 2 things to be carful with. see red arrows in the pics

1. The tabs on top of the vent will break if you just try and pull the vent out. A bit of care is required to remove. Not difficult.

2. The small wire has a wee tab that locks it in place. Just remove the connecter completely turn it upside down to reveal the tap and use a small screw driver to help unclip it

I ran the OBD cable down inside the plastic steering cover and out the bottom. I did not like the idea of running the wire down the side and squeezing it in-between the foot-well plastic covers as it would rub and possible rub through in time.

Overall happy with the gauge and functionality
Attached Images
F90 M5
X3MC, RS3, RS7, M5, S7, S3, RS3, RS6, GTR R35, 996 Turbo, M5, RS6 V10, Cayenne Turbo S
Appreciate 0
      02-04-2018, 09:00 PM   #2
Brigadier General

Drives: 19' SG M5 Competition
Join Date: Dec 2015
Location: Miami

iTrader: (2)

Thx for sharing.
19' M5C SG
Appreciate 0
Post Reply


Thread Tools Search this Thread
Search this Thread:

Advanced Search

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

All times are GMT -5. The time now is 12:44 AM.

Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2020, vBulletin Solutions Inc.
1Addicts.com, BIMMERPOST.com, E90Post.com, F30Post.com, M3Post.com, ZPost.com, 5Post.com, 6Post.com, 7Post.com, XBimmers.com logo and trademark are properties of BIMMERPOST