|
|
|
|
PLEASE HELP SUPPORT E90POST BY DOING YOUR TIRERACK SHOPPING FROM THIS BANNER, THANKS! |
|
BMW Garage | BMW Meets | Register | Today's Posts | Search |
|
BMW 3-Series (E90 E92) Forum
>
Will 9.5" ET35 wheels with 265 tires rub on the rear of a e90 LCI?
|
|
Wheels and Tires forum Sponsored by The Tire Rack
Please help to directly support e90post by doing your tirerack shopping from the above link. For every sale made through the link, e90post gets sponsor support to keep the site alive. Disclaimer |
|
Thread Tools | Search this Thread |
04-02-2011, 12:14 PM | #1 |
Second Lieutenant
28
Rep 277
Posts |
Will 9.5" ET35 wheels with 265 tires rub on the rear of a e90 LCI?
I've read that some people have problem with rubbing with ET35 9.5" wheels and 265 tires on LCI's. Can any vendors chime in?
|
04-02-2011, 08:47 PM | #2 | |
Major
261
Rep 1,029
Posts |
Quote:
I'm not a vendor, but have talked to several about this issue. I have a 2010 LCI E90 and most have told me a 19x9.5 ET35 with a 265/30/19 is right on the bubble for what WILL or WON'T rub. They say it might come down to which tire brand you choose (square or rounded shoulders). Most suggest an offset of 40 or more to avoid having any issues or having to roll the fenders. |
|
Appreciate
0
|
04-08-2011, 12:52 PM | #5 | |
BimmerPost Supporting Vendor
2040
Rep 25,989
Posts |
Quote:
-Charles@VMRWheels
__________________
VMR|Wheels | 714.442.7916 |
sales@velocitymotoring.com | www.velocitymotoring.com | facebook | flickr | Instagram |
|
Appreciate
0
|
05-10-2011, 07:17 PM | #6 |
Enlisted Member
2
Rep 46
Posts |
cssms - are you running Conti DWS's on the 9.5 35mm rears? Just want to make sure they don't rub since I'm looking to pull the trigger on the same setup (already have the tires).
|
Appreciate
0
|
05-10-2011, 07:28 PM | #7 |
Brigadier General
208
Rep 3,175
Posts |
Yes that is the size wheel I am running in the rear with a 265/30 tire. I have lowered my car since on Eibach Pro Kit springs and BMW Performance Dampers and I still don't rub.
|
Appreciate
0
|
05-10-2011, 08:08 PM | #8 | |
Enlisted Member
2
Rep 46
Posts |
Quote:
Now I just need to find a vendor with 19" staggered matte black SF-71's in stock |
|
Appreciate
0
|
05-10-2011, 09:58 PM | #9 |
First Lieutenant
19
Rep 347
Posts |
U shouldnt hv any problem with that set up . I am using 265/30 et 35 conti dws at the back. And I am lowered on kw v1 there's about 1.5 finger gap between the tire and the fender. And its all right. No problem at all. Mine is lci xdrive .
__________________
13' F30 335xi mods are on their way
09' E90 LCI 328xi (GONE, BUT NOT FORGOTTEN) 19" m310,quad conversion perf exhaust, full mtech conversion, m3 sides, kwv1,etc PICS:http://www.e90post.com/forums/showthread.php?t=757811 PM me if you need coding for f30s in GVR |
Appreciate
0
|
05-10-2011, 10:22 PM | #10 |
Brigadier General
229
Rep 3,173
Posts |
|
Appreciate
0
|
08-02-2011, 09:04 PM | #12 |
Second Lieutenant
10
Rep 271
Posts |
Several of us in the xdrive section are running this setup. I am running 275 rear Goodyear Assy. with no rubbing at all. Did not roll fenders.
__________________
|
Appreciate
0
|
08-04-2011, 05:40 PM | #13 |
Lieutenant
150
Rep 485
Posts |
Anybody with an LCI e90 try the AD08's in 265/35/18 on 18x9.5 ET35's? If they're going to rub, I may just buy a set of stock-sized tires (225/40 and 255/35) now & run them on my OEM 287's until I get wheels. Save me from having to suffer the RFTs any longer.
Last edited by Gimmethecash; 08-04-2011 at 07:17 PM.. Reason: Typo |
Appreciate
0
|
08-04-2011, 07:57 PM | #14 |
Major General
808
Rep 5,530
Posts |
That'll probably rub, the AD08s very wide/square... you could get away with it with a guard roll though.
|
Appreciate
0
|
Bookmarks |
|
|