Max tire width for 20×10.5 without rubbing

[TheHouseWon]

Looking into buying some Ferrada or Vorsteiner wheels and would like to hear about your experience. What size tire did you go with and were the tires rubbing?

[M5_Brandoe]

Are you lowered or stock height ? I am running 305 on cp springs, with 12mm square spacers and no rubbing.

[M6-Coupe]

What's the offset?
This is the most important thing to calculate the gap between both fender and suspension.
Use this:
https://www.rimsntires.com/specspro.jsp

[TheHouseWon]

I'm on KW HAS at a CP level. Not too much of a drop on it.

[13M5F10]

Originally Posted by TheHouseWon

I'm on KW HAS at a CP level. Not too much of a drop on it.

Are Ferrada the right offset? They wanted to sponsor my car at one point since I'm local to them and when we test fitted several designs they either came too far out or rubbed. Just a heads up. They may have come out with more offsets since then.

My vote would be vorsteiner for fitment, quality, and build. The ferradas will be heavier wheels than the vorsteiners.

I ran stock front tire size and 305 rears.

[TheHouseWon]

I have the vorsteiner vff105 on lay-away with SimplySTIG

Looks like I made the right choice

[MpowerMike]

305's

[SimplySTIG]

I ran 315's. Lowered on H&R with max factory camber (-3 deg). Rubs with people in back, or on cornering / hard dips.

Originally Posted by TheHouseWon

I have the vorsteiner vff105 on lay-away with SimplySTIG

Looks like I made the right choice

True that!

[carrera2RSL]

What offset are you intending to run ?

[TheHouseWon]

Originally Posted by carrera2RSL

What offset are you intending to run ?

I think 28 front, 25 rear

[apsuard]

I really like those VFF 105's.

I would run MPS4S in 275/35 and 305/30 with those and it will look stellar.

[carrera2RSL]

Originally Posted by TheHouseWon

I think 28 front, 25 rear

Easy for 9.5 and 10.0 at the front with et 28, at the rear et25 is fine for 10.5, some go et25 with an 11.0 but with an 11.0 et 29,30,31 probably better with 305.