BlendMount

pcohen15 · 05-10-2019, 09:17 PM

I use a BlendMount for my radar detector and they gave me a link to pass along to friends that will give you 12.5% off their prices.

Here you go: http://blendmount.refr.cc/petercohen

Full disclosure: I get 10% of whatever you spend, but you still save the 12.5% and then you'll have a referral code, too!

Here's my Uniden R3 installed.

black_F10M5 · 05-12-2019, 10:04 AM

thanks for sharing, I may go this route as well

any tips for which pins/wires we should be using for the mirror tap?

pcohen15 · 05-12-2019, 11:49 AM

Quote:

Originally Posted by black_F10M5

thanks for sharing, I may go this route as well

any tips for which pins/wires we should be using for the mirror tap?

It was super-easy, but I can't recall which two. Search this forum and a few DIYs will come up, or Google or YouTube. I want to say Green for Ground and Yellow-Brown for Power, but please check it out on your own.

The clamshell cover on the mirror just pops right off and the connectors are right there.

pcohen15 · 05-12-2019, 04:29 PM

Quote:

Originally Posted by pcohen15

It was super-easy, but I can't recall which two. Search this forum and a few DIYs will come up, or Google or YouTube. I want to say Green for Ground and Yellow-Brown for Power, but please check it out on your own.

The clamshell cover on the mirror just pops right off and the connectors are right there.

Found the instructions that I followed. Power is brown and green, ground is black and brown.

https://www.2addicts.com/forums/showthread.php?t=998321

black_F10M5 · 06-16-2019, 09:26 PM

Just used your code

Thanks for the link and the info

roscopeeco · 06-17-2019, 01:29 AM

I want to make sure I get the correct one. I put all my info in but nothing came up. Do you know the SKU of the one that you purchased. I have a 2016 M5 fwiw.

pcohen15 · 06-17-2019, 02:46 AM

Quote:

Originally Posted by black_F10M5

Just used your code

Thanks for the link and the info

pcohen15 · 06-17-2019, 02:51 AM

Quote:

Originally Posted by roscopeeco

I want to make sure I get the correct one. I put all my info in but nothing came up. Do you know the SKU of the one that you purchased. I have a 2016 M5 fwiw.

BNR2017 is what I have for my Uniden R3. my M5 is a 2013, but I doubt the mirror config changed between mine and yours since both are F10. Blendmount was always responsive on customer support, so give them a call if the online configurator isn't helping you.

pcohen15 · 06-17-2019, 02:55 AM

Quote:

Originally Posted by black_F10M5

Just used your code

Thanks for the link and the info

Needle nose pliers will be your friend if you're doing the mirror tap

05-10-2019, 09:17 PM	#1
pcohen15 Lieutenant 385 Rep 533 Posts Drives: 2013 F10 M5, Singapore Gray Join Date: Jun 2016 Location: Scottsdale, AZ iTrader: (0)	BlendMount I use a BlendMount for my radar detector and they gave me a link to pass along to friends that will give you 12.5% off their prices. Here you go: http://blendmount.refr.cc/petercohen Full disclosure: I get 10% of whatever you spend, but you still save the 12.5% and then you'll have a referral code, too! Here's my Uniden R3 installed. Attached Images __________________ 1972 Bavaria> 1973 3.0Si> 2013 328i> 2009 E92 M3> 2013 F10 M5: Singapore Gray over Sakhir Orange, Executive, Driving Assistance, B&O
	Appreciate 0 Tweet Quote

05-12-2019, 10:04 AM	#2
black_F10M5 Lieutenant 297 Rep 505 Posts Drives: F10 M5 Join Date: Jan 2016 Location: NJ iTrader: (1)	thanks for sharing, I may go this route as well any tips for which pins/wires we should be using for the mirror tap? __________________ 2016 M5 \| Instagram: @black_f10m5 IND cosmetic \| M Performance , RKP , 3D Design aero \| Eisenmann Race exhaust \| AMS catted downpipes \| MSR intake \| CSF charge coolers \| DME Stage 2 tune \| KW v3 coilovers \| BBS FI \| Michelin Pilot Sport 4S
	Appreciate 0 Quote

06-16-2019, 09:26 PM	#5
black_F10M5 Lieutenant 297 Rep 505 Posts Drives: F10 M5 Join Date: Jan 2016 Location: NJ iTrader: (1)	Just used your code Thanks for the link and the info __________________ 2016 M5 \| Instagram: @black_f10m5 IND cosmetic \| M Performance , RKP , 3D Design aero \| Eisenmann Race exhaust \| AMS catted downpipes \| MSR intake \| CSF charge coolers \| DME Stage 2 tune \| KW v3 coilovers \| BBS FI \| Michelin Pilot Sport 4S
	Appreciate 0 Quote

06-17-2019, 01:29 AM	#6
roscopeeco Private First Class 35 Rep 142 Posts Drives: 2016 BMW M5 Join Date: Jun 2019 Location: memphis, tn iTrader: (0)	I want to make sure I get the correct one. I put all my info in but nothing came up. Do you know the SKU of the one that you purchased. I have a 2016 M5 fwiw.
	Appreciate 0 Quote