Boost tap reference

[m5garage]

I'm installing Snow Performmace Methanal stage 2kit with Vc-50 boost controller.

Current upgrades:
Tuned: MHD stage 2 93 octane
CTS Charge Cooler
CTS Charge Pipe
FCP Catless Downpipe
Turbomaster Axelback exhaust

I'm planning on switching to JB4 depending on capabilities with Methanol Tune & MHD.
Does anyone have information on that.


The charge pipes I have and others online only come with 2 bungs. Which are for methanol Spray.

The Vc-50 is analog boost reader. I already ported a whole through rubber grommet. I'm working where the TAP reference would go?

I could drill into my charge pipe make a TAP. There must be a clear way.

Should I call up machinist/ CNC shop to make me 4 bung charge pipe?

[MKZN]

Hey man, i’m currently installing my aem wmi kit. I’ve ordered boost tap/map spacer, similar to the one you have on the screenshot, and i will try to install it on intercoolers. Charge pipe tap installation would be less desirable, as the pressure there could be higher than the actual air coming into throttle bodies through intercoolers.

[m5garage]

Where on the Charge coolers atenyii goignto tap in?

The best boost reference would be at MAP sensor. Using a spacer with a 1/8 barb niple coming off.