What water/meth mixture are you running?

[bogart]

Format:

Car: 2011 N55 DCT
Kit: BMS WW Meth w/ JB4 Stage 2
Mixture: 1 gal Walmart Supertech WWF (-20) w/ 1 bottle HEET

I've read that this gets close to a 45% meth / 55% water mixture

[cooler2442]

50/50.

I just buy Boost Juice online for about 30$ per 4 gallons since I don't have a garage and to lazy to mix.

[RaihaX]

I would say somewhere along the line of 56/44 as I am too lazy to mix by weight and go by volume instead

[chopper817]

I thought it was 1gal of -20 with 3-4 bottles of heet to make about 50/50

I found this....

http://forums.nasioc.com/forums/showthread.php?t=1461156

[bogart]

Originally Posted by RaihaX

I would say somewhere along the line of 56/44 as I am too lazy to mix by weight and go by volume instead

What do you use?

Originally Posted by chopper817

I thought it was 1gal of -20 with 3-4 bottles of heet to make about 50/50

I found this....

http://forums.nasioc.com/forums/show....php?t=1461156

That's interesting. Is there any issue with not running enough meth content and/or too much water?

What do you use?

[RaihaX]

Originally Posted by bogart

What do you use?

I use distilled water and mix it with 100% meth (Coogee methanol aussie brand, same stuff as VP M-1 that you americans have ).

[bdoooh]

Originally Posted by bogart

That's interesting. Is there any issue with not running enough meth content and/or too much water?

I don't imagine so.. meth increases octane & water helps with cooling. The ECU should adjust appropriately.

[jonnyrocket]

Originally Posted by bogart

That's interesting. Is there any issue with not running enough meth content and/or too much water?

Its all in the tune. There are people that run 100% water injection, some that run 100% methanol, and every ratio in between.